###
有色金属(冶炼部分):2019,(4):56-59
本文二维码信息
码上扫一扫!
国外某含砷难处理金矿提金工艺试验
张伟晓,闾娟沙,张济文
(灵宝灵金科技有限公司,472500,灵宝灵金科技有限公司,472500,灵宝灵金科技有限公司,472500)
Technological Test on Abroad Arsenic Bearing Refractory Gold Mine
Zhang Weixiao,lv Juansha and Zhang Jiwen
(Lingbao Lingjin Technology Co.,Ltd.,472500,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 931次   下载 844
投稿时间:2018-12-06    修订日期:2018-12-13
中文摘要: 国外某选矿厂浮选所得金精矿,其中杂质元素砷、硫、铁主要以毒砂和黄铁矿的形式存在于金精矿中,多数金被包裹在硫化物中。该金精矿直接氰化浸出金浸出率仅有70.89%。对比通过碱浸、细磨和热压氧化三种不同的预处理方式后金的浸出率,最终选定酸性热压氧化浸出。在氧化矿浆浓度20%、氧分压0.7 MPa、搅拌速度600 r/min、温度160 ℃、氧化反应3 h的预处理后进行氰化浸出,金浸出率达到97.49%。
Abstract:Gold concentrates obtained by flotation from a foreign concentrator, in which the impurity elements arsenic, sulfur and iron were mainly present in form of arsenopyrite and pyrite, and most of gold was encapsulated in sulfide. Gold direct cyanide leaching rate was only 70.89%. Acidic hot-pressure oxidative leaching was selected after comparing gold leaching rates of three different pretreatment methods, i.e, alkali leaching, fine grinding and hot-pressing oxidation. Gold cyanidation leaching rate is 97.49% after pretreatment under the optimum conditions including oxidation pulp concentration of 20%, oxygen partial pressure of 0.7 MPa, stirring speed of 600 r/ min, temperature of 160 ℃, and oxidation time of 3 h.
文章编号:     中图分类号:    文献标志码:
基金项目:
引用文本:
张伟晓,闾娟沙,张济文.国外某含砷难处理金矿提金工艺试验[J].有色金属(冶炼部分),2019(4):56-59.
Zhang Weixiao,lv Juansha,Zhang Jiwen.Technological Test on Abroad Arsenic Bearing Refractory Gold Mine[J].Nonferrous Metals (Extractive Metallurgy),2019(4):56-59.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号