陈治毓,潘从明,杜彦君,张燕,阎艳,张晓凯.焙砂与低镍低硒铜阳极泥混合物料加压浸出工艺研究[J].有色金属(冶炼部分),2019(10):58-62.
焙砂与低镍低硒铜阳极泥混合物料加压浸出工艺研究
Study on Pressure Leaching of Mixture of Calcine with Low-Selenium and Low-Nickel Bearing Copper Anode Mud
投稿时间:2019-03-27  修订日期:2019-04-09
DOI:doi:10.3969/j.issn.1007-7545.2019.10.013
中文关键词:  焙砂  铜阳极泥  加压浸出  Te  Ag  Se
英文关键词:calcine  copper anode mud  mixing  pressure leaching  Te  Ag  Se
基金项目:2017年度中华全国总工会职工创新补助资金资助项目(工劳经函201723号)
                 
作者单位
陈治毓 金川集团铜业公司
潘从明 金川集团铜业公司
杜彦君 金川集团铜业公司
张燕 金川集团铜业公司
阎艳 金川集团营销公司
张晓凯 金川集团铜业公司
摘要点击次数: 37
全文下载次数: 70
中文摘要:
      研究了回转窑处理高镍高硒铜阳极泥产出的焙砂与低镍低硒铜阳极泥混合物料加压浸出新工艺,考察了配料比、浸出酸度、浸出温度、浸出压力、通氧时间和液固比等对混合物料在加压浸出过程中Ni、Cu、Te、Ag、Se等元素浸出率的影响。研究表明,控制焙砂与低镍低硒铜阳极泥质量比1︰2、加压浸出酸度100~120 g/L、反应温度160~170 ℃、釜压0.8 MPa、液固比4︰1、通氧反应时间5 h时,可有效抑制该混合物料中银、硒的浸出,Ni、Cu、Te的浸出率较高,浸出渣中碲的含量较低,并成功应用于生产实践。
英文摘要:
      New technology of pressure leaching of mixed materials of calcine produced by high-nickel and high-selenium copper anode mud roasting in rotary kiln and low-nickel and low selenium copper anode mud was studied. Effects of mixture ratio, leaching acidity, temperature, pressure, time, and L/S on leaching rates of Ni, Cu, Te, Ag, Se pressure leaching process were investigated. The results show that selenium and silver in mixture are effectively inhibited with high leaching rates of Ni, Cu and Te and low tellurium content in leaching residue under the conditions including mass ratio of calcine and copper anode mud of 1︰2, leaching acidity of 100-120 g/L, temperature of 160-170 ℃, pressure of autoclave of 0.8 MPa, L/S of 4︰1, and reaction time of 5 h. This new technology is successfully applied to production practice.
查看全文  查看/发表评论  下载PDF阅读器
关闭