本文已被:浏览 749次 下载 716次
投稿时间:2020-04-21 修订日期:2020-04-27
投稿时间:2020-04-21 修订日期:2020-04-27
中文摘要: 在653~673 K温度下电解LiCl-KCl体系制备金属锂,分别研究电解温度、电流密度、电解质比例以及阴阳极间距对金属锂电解电流效率的影响。最佳电解温度为653~673 K、LiCl-KCl电解质最佳质量比为LiCl︰KCl=50%︰50%,同时较大的电流密度与极距对电流效率更有利。
Abstract:Lithium metal was produced from LiCl-KCl molten salt at 653-673 K by molten salt electrolysis. Effects of electrolysis temperature, current density, electrolyte ratio, and inter-electrode distance on current efficiency of lithium metal electrolysis are analyzed. The results show that the optimum electrolysis temperature is 653-673 K, the optimum mass ratio of LiCl-KCl electrolyte is 50%︰50%, and higher current density and pole distance is beneficial to current efficiency.
文章编号: 中图分类号: 文献标志码:
基金项目:国家重点研发计划项目(2018TFC0604806)
作者 | 单位 | |
张松岩 | 华东理工大学 | 13248233912@163.com |
朱实贵 | 江西赣锋锂业股份有限公司 | |
路贵民* | 华东理工大学 | gmlu@ecust.edu.cn |
Author Name | Affiliation | |
Zhang Song-yan | ECUST | 13248233912@163.com |
Zhu Shi-gui | ||
Lu Gui-min | ECUST | gmlu@ecust.edu.cn |
引用文本:
张松岩,朱实贵,路贵民.工艺条件对金属锂电解过程影响研究[J].有色金属(冶炼部分),2020(8):47-50.
Zhang Song-yan,Zhu Shi-gui,Lu Gui-min.Study on Effects of Technological Conditions on Electrolysis of Lithium Metal[J].Nonferrous Metals (Extractive Metallurgy),2020(8):47-50.
张松岩,朱实贵,路贵民.工艺条件对金属锂电解过程影响研究[J].有色金属(冶炼部分),2020(8):47-50.
Zhang Song-yan,Zhu Shi-gui,Lu Gui-min.Study on Effects of Technological Conditions on Electrolysis of Lithium Metal[J].Nonferrous Metals (Extractive Metallurgy),2020(8):47-50.