本文已被：浏览 690次 下载 481次
投稿时间：2020-12-09 修订日期：2020-12-23
投稿时间：2020-12-09 修订日期：2020-12-23
中文摘要: 为了更高效地回收手机芯片，对手机线路板拆解过程进行优化试验。拆解线路板选择空气热对流和热传导两种加热方式。通过试验分析了升温速率、保温时间和预热阶段温度对拆解过程和拆解芯片的完整性的影响，确定3 ℃/s的升温速率、预热170 ℃保温90 s的拆解效果更好。不同封装方式的芯片在拆解时的温度条件也有细微差异。
Abstract:In order to recycle mobile phone chips more efficiently, optimization experiments were carried out on disassembly process of mobile phone printed circuit boards. Two heating methods of air heat convection and heat conduction were chosen to disassemble printed circuit board. Effects of heating rate, holding time and preheating temperature on disassembly process and integrity of disassembled chip were analyzed through experiments. It is determined that heating rate of 3 ℃/s and preheating at 170 ℃ for 90 s have better dismantling effects. There are also slight differences in temperature conditions when disassembling chips with different packaging methods.
文章编号： 中图分类号： 文献标志码：
基金项目:国家重点研发计划项目(2018YFC1902303)；上海市高原学科-环境科学与工程(资源循环科学与工程)资助项目；上海第二工业大学研究生项目基金资助项目(EGD19YJ0057)；上海第二工业大学校重点学科建设项目(XXKZD1602)
引用文本：
段琪昱,张承龙,王瑞雪,马恩,黄庆,王景伟,符永高,邓梅玲.废旧手机线路板上芯片无损拆解过程研究[J].有色金属（冶炼部分）,2021(5):112-120.
DUAN Qi-yu,ZHAGN Cheng-long,WANG Rui-xue,MA En,HUANG Qing,WANG Jing-wei,FU Yong-gao,DENG Mei-ling.Research on Nondestructive Disassembly Process of Chips on Printed Circuit Boards of Waste Mobile Phones[J].Nonferrous Metals (Extractive Metallurgy),2021(5):112-120.
段琪昱,张承龙,王瑞雪,马恩,黄庆,王景伟,符永高,邓梅玲.废旧手机线路板上芯片无损拆解过程研究[J].有色金属（冶炼部分）,2021(5):112-120.
DUAN Qi-yu,ZHAGN Cheng-long,WANG Rui-xue,MA En,HUANG Qing,WANG Jing-wei,FU Yong-gao,DENG Mei-ling.Research on Nondestructive Disassembly Process of Chips on Printed Circuit Boards of Waste Mobile Phones[J].Nonferrous Metals (Extractive Metallurgy),2021(5):112-120.
关注微信公众号