本文已被:浏览 1023次 下载 1266次
投稿时间:2023-04-12 修订日期:2023-04-19
投稿时间:2023-04-12 修订日期:2023-04-19
中文摘要: 泥是硼砂和硼酸生产过程中产生的工业废渣,大量排放不但占用大量的土地,造成地下水污染,失水后飞散成为粉尘,还造成大气污染。将硼泥掺杂到以重烧氧化镁和磷酸二氢钾为原材料制备的磷酸镁水泥中,研究硼泥掺杂对磷酸镁水泥性能的影响。结果表明:硼泥能够延长磷酸镁水泥的缓凝时间,同时能够提高水泥的抗压强度。硼泥的最佳掺量为10%,水泥凝结时间由原来的29 min延长到35 min,水泥抗压强度由56.21 MPa提高到58.7 MPa。XRD分析结果表明,硼泥的加入没有改变磷酸镁水泥的矿相结构。本研究可以为硼泥固废资源化利用提供依据。
Abstract:Boron mud is industrial waste residue produced in the production process of borax and boric acid. A large amount of discharge not only occupies a large amount of land, causes groundwater pollution, and scatters into dust after water loss, and also causes air pollution. Boron mud was doped into magnesium phosphate cement prepared from dead-burned magnesia and potassium dihydrogen phosphate, and the effect of boron mud as admixture on the properties of magnesium phosphate cement was studied. The research results show that boron mud can prolong the retardation time of magnesium phosphate cement and improve the compressive strength of cement. The experimental results show that when the content of boron mud is 10%, the setting time of cement is extended from 29 min to 35 min, and the compressive strength of cement increases from 56.21 MPa to 58.7 MPa. XRD analysis results show that the addition of boron mud does not change the mineral phase structure of magnesium phosphate cement. This study can provide a basis for the resource utilization of boron mud solid waste.
文章编号: 中图分类号: 文献标志码:
基金项目:国家重点研发计划项目(2020YFC1909300)
| 作者 | 单位 | |
| 曹佳 | 辽宁科技大学 材料与冶金学院 | 1061397762@qq.com |
| 王一雍 | 辽宁科技大学 材料与冶金学院 | |
| 王晓民* | 营口理工学院 材料科学与工程学院 | ty.com.cn@126.com |
引用文本:
曹佳,王一雍,王晓民.硼泥掺杂对磷酸镁水泥性能的影响[J].有色金属(冶炼部分),2023(9):159-166.
CAO Jia,WANG Yiyong,WANG Xiaoming.Influence of Boron Mud Doping on Properties of Magnesium Phosphate Cement[J].Nonferrous Metals (Extractive Metallurgy),2023(9):159-166.
曹佳,王一雍,王晓民.硼泥掺杂对磷酸镁水泥性能的影响[J].有色金属(冶炼部分),2023(9):159-166.
CAO Jia,WANG Yiyong,WANG Xiaoming.Influence of Boron Mud Doping on Properties of Magnesium Phosphate Cement[J].Nonferrous Metals (Extractive Metallurgy),2023(9):159-166.

关注微信公众号