###
有色金属(冶炼部分):2024,(12):8-16
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
双侧吹熔池熔炼炉内气液两相流数值模拟研究
陈朝辉1, 赵升辉2, 赵明杰1, 赵国华1, 张小雪1, 陈卓2, 宋彦坡2
(1.赤峰云铜有色金属有限公司;2.中南大学 能源科学与工程学院)
Numerical Simulation of Gas-Liquid Two Phase Flow in a Double-Side-Blown Bath Smelter
CHEN Zhaohui1, ZHAO Shenghui, ZHAO Mingjie, ZHAO Guohua, ZHANG Xiaoxue, CHEN Zhuo, SONG Yanpo2
(1.YCC Chifeng Non-ferrous Metals Co,Ltd;2.School of Energy Science and Engineering,Central South University)
摘要
图/表
参考文献
相似文献
本文已被:浏览 518次   下载 223
投稿时间:2024-06-03    修订日期:2024-07-24
中文摘要: 为了探索铜双侧吹熔池熔炼过程增产增效的实现途径,以赤峰云铜有色金属有限公司的实际双侧吹熔池熔炼炉为原型,运用VOF等方法构建了炉内气液两相流动过程数值模型,据此对不同送风流量(1 300、1 500、1 700 m3/h,标态)条件下的熔炼过程进行了数值模拟。结果表明,提升送风流量能够在一定程度上提高熔炼效率,但同时也可能导致烟尘发生率增大等问题,因此,送风流量的增幅不宜过大。
Abstract:In order to explore the approach to increase production efficiency of copper Double-Side-Blown (DSB) smelting process, a numerical model of gas-liquid two phase flow was developed by using VOF and other methods based an actual DSB smelting furnace in YCC Chifeng Non-ferrous Metals Co., Ltd., and the smelting process under different air flow rate (1 300, 1 500 and 1 700 m3/h, in standard condition) was numerical simulated. The simulation results show that increasing the air supply flow can improve the smelting efficiency to a certain extent, but it may also lead to the increase of the incidence of dust, so the increase of the air supply flow should not be too large.
文章编号:     中图分类号:    文献标志码:
基金项目:国家自然科学基金资助项目(52304377)
引用文本:
陈朝辉,赵升辉,赵明杰,赵国华,张小雪,陈卓,宋彦坡.双侧吹熔池熔炼炉内气液两相流数值模拟研究[J].有色金属(冶炼部分),2024(12):8-16.
CHEN Zhaohui,ZHAO Shenghui,ZHAO Mingjie,ZHAO Guohua,ZHANG Xiaoxue,CHEN Zhuo,SONG Yanpo.Numerical Simulation of Gas-Liquid Two Phase Flow in a Double-Side-Blown Bath Smelter[J].Nonferrous Metals (Extractive Metallurgy),2024(12):8-16.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号