###
有色金属(冶炼部分):2024,(11):19-27
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
闪速炼铁技术研究进展
张仁杰, 张文海
(中国瑞林工程技术股份有限公司)
Research Progress of Flash Ironmaking Technology
ZHANG Renjie, ZHANG Wenhai
(China Nerin Engineering Co., Ltd.)
摘要
图/表
参考文献
相似文献
本文已被:浏览 50次   下载 25
投稿时间:2024-08-27    修订日期:2024-08-29
中文摘要: “闪速炼铁”是基于学科融合思维,将有色冶金行业成熟的闪速熔炼方法拓展用于炼铁的一项非高炉炼铁工艺与工程技术,目标是实现低能耗、低投资、规模化的近零碳炼铁。本文综述了闪速炼铁技术(简称闪铁)已完成的实验室试验及中试试验成果,同时,就该技术的未来产业化进行评估。结果显示,闪铁可高效处理低品位复杂矿,取消球团烧结、球化、焦化等原料预处理工段,可实现零碳排放,易于规模化,可实现一步炼钢,综合能耗指标优于现有高炉炼铁工艺(闪铁吨钢351 kgce<高炉吨铁553 kgce)。
Abstract:“Flash ironmaking” is a non-blast furnace ironmaking process and engineering technology based on the cross-disciplinary integration, which extends the mature flash smelting process of non-ferrous metallurgical industry to ironmaking. Its goal is to achieve near-zero carbon ironmaking with low energy consumption, low investment and large scale. In this paper, the laboratory and pilot test results of flash ironmaking technology (flash iron for short) were summarized, and the future industrialization of this technology was evaluated. The results show that the flash iron can efficiently treat low-grade complex ore, cancel the raw material pretreatment section such as pellet sintering, spheroidization and coking, achieve zero carbon emission, easy to scale, and realize one-step steelmaking. The comprehensive energy consumption (351 kgce per ton steel) of flash iron is less than that of the blast furnace ironmaking process (553 kgce per ton iron).
文章编号:     中图分类号:    文献标志码:
基金项目:中国宝武低碳冶金创新基金资助项目(BWLCF202121)
引用文本:
张仁杰,张文海.闪速炼铁技术研究进展[J].有色金属(冶炼部分),2024(11):19-27.
ZHANG Renjie,ZHANG Wenhai.Research Progress of Flash Ironmaking Technology[J].Nonferrous Metals (Extractive Metallurgy),2024(11):19-27.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号