###
有色金属(冶炼部分):2012,(11):10-12
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
镍钼矿加压酸浸新工艺研究
张邦胜,蒋开喜,王海北
(北京矿冶研究总院冶金研究所,北京矿冶研究总院,东北大学材料与冶金学院)
Study on New Technology of Acid Pressure Leaching on Ni-Mo Ore
zhangbangsheng,jiangkaixi and wanghaibei
(bgrimm,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2941次   下载 2187
投稿时间:2012-07-15     修订日期:2012-07-16     录用日期:2012-07-16     网络发布日期:2012-10-23
中文摘要: 提出一种加压酸浸处理镍钼矿的新工艺,考察温度、氧分压、液固比、时间等对镍钼转化率和浸出率的影响。结果表明,在液固比为5,氧分压为0.4 MPa,150 ℃反应2 h的条件下,钼转化率可以达到98.3%以上,镍浸出率达到98.7%。
中文关键词: 加压浸出  镍钼矿  浸出    
Abstract:A new technology of acid pressure leaching was developed to treat Ni-Mo ore. The effects of temperature, partial pressure of oxygen, ratio of liquid to solid (L/S), and reaction time on oxidation rate and leaching rate of nickel and molybdenum were studied. The results show that the oxidation rate of molybdenum is over 98.3% and the leaching rate of nickel is 98.7%, under the optimum conditions including L/S=5, partial pressure of oxygen of 0.4 MPa, temperature of 150 ℃, and reaction time of 2 h.
文章编号:     中图分类号:    文献标志码:
基金项目:
Author NameAffiliationE-mail
zhangbangsheng bgrimm zbsvictory@sina.com 
jiangkaixi   
wanghaibei   
引用文本:
张邦胜,蒋开喜,王海北.镍钼矿加压酸浸新工艺研究[J].有色金属(冶炼部分),2012(11):10-12.
zhangbangsheng,jiangkaixi,wanghaibei.Study on New Technology of Acid Pressure Leaching on Ni-Mo Ore[J].Nonferrous Metals (Extractive Metallurgy),2012(11):10-12.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号