本文已被:浏览 1321次 下载 1703次
投稿时间:2017-03-27 修订日期:2017-03-29
投稿时间:2017-03-27 修订日期:2017-03-29
中文摘要: 采用SEM和EDS分析了镁热法生产海绵钛用镁还原剂中杂质的分布及成分,根据实际生产过程找到了杂质的来源,提出了杂质的控制措施。
Abstract:Distribution and composition of impurities in magnesium reductant used in production of sponge titanium by magnesium reduction process were analyzed by SEM & EDS. The sources of impurities are found based on actual production process. Impurity control measurements are proposed.
keywords: SEM EDS sponge titanium magnesium reductant impurity
文章编号: 中图分类号: 文献标志码:
基金项目:国际科技交流与合作专项项目(2010DFB73170)
作者 | 单位 | |
马尚润* | 攀钢集团研究院有限公司 | mashr19901027@163.com |
朱福兴 | 攀钢集团研究院有限公司 | |
姜宝伟 | 攀钢集团钛业有限责任公司 |
引用文本:
马尚润,朱福兴,姜宝伟.提高镁热法生产海绵钛用镁还原剂质量的研究[J].有色金属(冶炼部分),2017(9):32-35.
MA Shang-run,ZHU Fu-xing,JIANG Bao-wei.Study on Improving Quality of Magnesium Reductant in Production of Sponge Titanium by Magnesium Reduction Process[J].Nonferrous Metals (Extractive Metallurgy),2017(9):32-35.
马尚润,朱福兴,姜宝伟.提高镁热法生产海绵钛用镁还原剂质量的研究[J].有色金属(冶炼部分),2017(9):32-35.
MA Shang-run,ZHU Fu-xing,JIANG Bao-wei.Study on Improving Quality of Magnesium Reductant in Production of Sponge Titanium by Magnesium Reduction Process[J].Nonferrous Metals (Extractive Metallurgy),2017(9):32-35.