###
有色金属(冶炼部分):2020,(3):75-78
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
单相Sm掺杂BaTiO3陶瓷的结构研究
刘巧丽, 刘军伟, 王辰, 路大勇
(吉林化工学院 材料科学与工程学院)
Structure of Single-phase Sm-doped BaTiO3 Ceramics
LIU Qiao-li, LIU Jun-wei, WANG Chen, LU Da-yong
(School of Material Science and Technology,Jilin Institute of Chemical Technology)
摘要
图/表
参考文献
相似文献
本文已被:浏览 725次   下载 578
投稿时间:2019-10-14    修订日期:2019-10-19
中文摘要: 采用高温固相反应法,在1 400 ℃/12 h烧结条件下制备了具有Ti空位补偿的Ba1-xSmxTi1-x/4O3(BST;x=0.02~0.07)陶瓷。利用XRD对BST陶瓷的晶体结构进行表征,并在532和638 nm两种激发波长下对其进行拉曼光谱测试。结果表明:当x≤0.07时,所有的BST陶瓷均表现为单相钙钛矿结构,并且随着Sm含量的增加,其晶体结构由四方相(x≤0.06)转变为立方相(x=0.07);不同激发波长下的拉曼测试证实高频谱来自稀土Sm3+的荧光效应。
中文关键词: 钛酸钡  钐掺杂  单相  荧光效应
Abstract:Ba1-xSmxTi1-x/4O3 (BST) (x=0.02-0.07) ceramics with Ti vacancy compensation were prepared using high temperature solid state reaction at 1 400 ℃/12 h. Crystal structure of BST ceramics was characterized by XRD, and Raman spectra were measured at 532 and 638 nm excitation wavelengths. The results show that all samples are single-phase perovskite structure when x≤0.07, and crystal structure changes from tetragonal (x≤0.06) to cubic (x=0.07). Raman spectra excited by different lasers confirm that high-frequency spectra are related to fluorescent effect of Sm3+.
文章编号:     中图分类号:    文献标志码:
基金项目:吉林省发改委项目(2019C044-1)
引用文本:
刘巧丽,刘军伟,王辰,路大勇.单相Sm掺杂BaTiO3陶瓷的结构研究[J].有色金属(冶炼部分),2020(3):75-78.
LIU Qiao-li,LIU Jun-wei,WANG Chen,LU Da-yong.Structure of Single-phase Sm-doped BaTiO3 Ceramics[J].Nonferrous Metals (Extractive Metallurgy),2020(3):75-78.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号