本文已被：浏览 2621次 下载 2261次
投稿时间：2013-01-31 修订日期：2013-02-01 录用日期：2013-02-04 网络发布日期：2013-07-18
投稿时间：2013-01-31 修订日期：2013-02-01 录用日期：2013-02-04 网络发布日期：2013-07-18
中文摘要: 研究了HAT6065型高气泡表面积通量氰化浸出搅拌槽的清水动力学性能，简要分析了4种充气器配置条件下，充气量、空气分散度、溶解氧量、空气保有量等参数之间的关系。结果表明，在4种充气器配置条件下，氰化浸出搅拌槽的空气分散度均较高，可以为确定工业应用条件提供依据。
Abstract:The hydrodynamics of HAT6065 mechanical agitation leaching tank with high bubble surface area flux was studied. The relationships between gas flow rate, air dispersity, dissolved oxygen, air holdup and etc. were briefly analyzed with the configuration positions of four bubble generators. The results show that the air dispersity in mechanical agitation leaching tank maintains high with the configuration positions of four bubble generators. This result can serve as the basis for industrial application.
keywords: high bubble surface area flux dissolved oxygen cyaniding leaching tank hydrodynamics air dispersity
文章编号： 中图分类号： 文献标志码：
基金项目:国家高技术研究发展计划（863计划）项目（2012AA061503）
| Author Name | Affiliation | |
| Zhang Ming | Beijing General Research Institute of Mining and Metallurgy | zhangming@bgrimm.com |
| fengtianran | ||
| dongganguo |
引用文本：
张明,冯天然,董干国.HAT6065型氰化浸出搅拌槽清水动力学研究[J].有色金属（冶炼部分）,2013(8):39-41.
Zhang Ming,fengtianran,dongganguo.Hydrodynamics Study of HAT6065 Mechanical Agitation Cyaniding Leaching Tank[J].Nonferrous Metals (Extractive Metallurgy),2013(8):39-41.
张明,冯天然,董干国.HAT6065型氰化浸出搅拌槽清水动力学研究[J].有色金属（冶炼部分）,2013(8):39-41.
Zhang Ming,fengtianran,dongganguo.Hydrodynamics Study of HAT6065 Mechanical Agitation Cyaniding Leaching Tank[J].Nonferrous Metals (Extractive Metallurgy),2013(8):39-41.
关注微信公众号