|
| Effect of Nickel Content on Mechanical Properties and Amorphous Formation Ability of (Zr0.83Cu0.17)88-xAl12Nix Alloy |
|
Received:March 12, 2013
Revised:March 14, 2013
Accepted:March 14, 2013
Published Online:August 22, 2013
|
| View Full Text View/Add Comment Download reader |
| DOI：10.3969/j.issn.1007-7545.2013.09.013 |
| KeyWord:(Zr0.83Cu0.17)88-xAl12Nix amorphous alloy; mechanical properties; amorphous formation ability |
| Author | Institution |
| jiagnweike |
兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室 |
| koushengzhong |
兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室 |
| zhaoyanchun |
兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室 |
| yuanxiaopeng |
兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室 |
| lichunyan |
兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室 |
| lichao |
兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室 |
| xuchong |
兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室 |
| xingqiuwei |
兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室 |
|
| Hits: 2565 |
| Download times: 2699 |
| Abstract: |
| (Zr0.83Cu0.17)88-xAl12Nix amorphous alloy was prepared by suction casting of copper. The effects of nickel content on amorphous alloy formation ability and mechanical properties were investigated. The results show that the alloy is not completely amorphous when nickel content is low. The breaking strength and plastic strain is 1 679 MPa and 7.56% respectively when nickel mass fraction is 10%, and the width of undercooling liquid phase (△T) is 84.64 K. The alloy of this component has stronger amorphous formation ability. |
| Close |