|
| Analysis on Influence Factors for Period of Reduction Process in Titanium Sponge Production |
|
Received:February 09, 2015
Revised:February 11, 2015
Accepted:February 15, 2015
Published Online:July 17, 2015
|
| View Full Text View/Add Comment Download reader |
| DOI：doi：10.3969/j.issn.1007-7545.2015.08.007 |
| KeyWord:titanium sponge; period of reduction process; influence factor; magnesiothermic reduction |
| Author | Institution |
| LI Liang |
攀钢集团研究院有限公司 |
| LI Kai-hua |
攀钢集团研究院有限公司 |
| MIAO Qing-dong |
攀钢集团研究院有限公司 |
| SHENG Zhuo |
攀钢集团研究院有限公司 |
| CHENG Xiao-zhe |
攀钢集团研究院有限公司 |
| XU Hu-cheng |
攀钢集团钛业有限责任公司 |
| XIA Jian-hui |
攀钢集团钛业有限责任公司 |
|
| Hits: 2513 |
| Download times: 2783 |
| Abstract: |
| The proportion distribution of different stages during titanium sponge reduction production by magnesiothermic reduction was analyzed. The effects of dosage of condensate magnesium and magnesium ingot, TiCl4 charging, high temperature constant time, and equipment failure on period of reduction process were investigated. The results show that period of reduction process is extended with increasing dosage of condensate magnesium and magnesium ingot. Period of reduction process can be shortened remarkably by lowering equipments failure rate and stabilizing high temperature constant time and TiCl4 charging. |
| Close |