|
| Removal of U(VI) from Aqueous Solution with Nanoscale Fe/Ni Bimetal |
|
Received:February 02, 2018
Revised:February 08, 2018
Accepted:February 11, 2018
Published Online:June 15, 2018
|
| View Full Text View/Add Comment Download reader |
| DOI：doi：10.3969/j.issn.1007-7545.2018.07.017 |
| KeyWord:nanoscale Fe/Ni bimetal; uranium; removal; adsorption capacity |
| Author | Institution |
| LIU Qingqing |
东华理工大学核资源与环境省部共建国家重点实验室培育基地 |
| LI Xiaoyan |
东华理工大学核资源与环境省部共建国家重点实验室培育基地 |
| QIN Qifeng |
东华理工大学核资源与环境省部共建国家重点实验室培育基地 |
| LIU Chen |
东华理工大学核资源与环境省部共建国家重点实验室培育基地 |
| ZHANG Zihan |
东华理工大学核资源与环境省部共建国家重点实验室培育基地 |
| LIU Xue |
东华理工大学核资源与环境省部共建国家重点实验室培育基地 |
| CHEN Yujie |
东华理工大学核资源与环境省部共建国家重点实验室培育基地 |
|
| Hits: 2308 |
| Download times: 2385 |
| Abstract: |
| Nanoscale Fe/Ni bimetal was prepared by synchronous liquid phase method to remove U(VI) from aqueous solution. Nanoscale Fe/Ni bimetal was characterized by BET and SEM. Effects of n(Fe)/n(Ni), pH value, initial U(VI) concentration, adsorption time, and adsorption temperature on remove of U(VI) were investigated by batch test method. The results show that adsorption capacity is 161.91 mg/g at pH=3.5, adsorption time of 30 min, and adsorption temperature of 25 ℃. |
| Close |