|
| Study on Physicochemical Properties of CaO-Al2O3 Basis Slag for High Aluminum and Manganese Steel Mold Powder |
| Received:March 30, 2018 Revised:April 03, 2018 |
| View Full Text View/Add Comment Download reader |
| DOI：doi：10.3969/j.issn.1007-7545.2018.09.016 |
| KeyWord:mold powder; high aluminum and high manganese steel; melting temperature; crystallization |
| Author | Institution |
| Yang Fan |
华北理工大学冶金与能源学院 |
| Zeng Yijun |
华北理工大学 |
| Bi Yanxue |
华北理工大学冶金与能源学院 |
| Han Yihua |
华北理工大学冶金与能源学院 |
| XY Jin-zhong |
华北理工大学冶金与能源学院 |
| ZHU Li-guang |
华北理工大学冶金与能源学院 |
|
| Hits: 772 |
| Download times: 1021 |
| Abstract: |
| CaO-Al2O3 based protective slag was prepared based on L25(65) orthogonal experiment. Influence of different components on physical and chemical properties of casting powder of high aluminum and manganese steel was studied and analyzed. The results show that melting temperature of molten slag of CaO-Al2O3-based castings powder drops with increase of different components. The sequence of influence on melting temperature is Li2O>Na2O>B2O3>BaO>CaF2>MgO. Content of each component within a certain range weakens viscosity of CaO-Al2O3-based continuous casting powder. Order of crystallinity of protective slag from difficulty to easiness is No.3, No.4, No.23, No.19, No.20, and No.5. Ca3B2O6, with low melting point, good glass formation and difficulty to crystallize, exists in most cooling precipitates calculated by thermodynamic software and meets the requirement of high aluminum and manganese steel continuous casting. |
| Close |