|
| Design and Research of Support Beam for 500 kA Aluminum Cell |
|
Received:December 05, 2018
Revised:December 12, 2018
Accepted:December 13, 2018
Published Online:February 15, 2019
|
| View Full Text View/Add Comment Download reader |
| DOI：doi：10.3969/j.issn.1007-7545.2019.03.008 |
| KeyWord:aluminum cell; support beam; comprehensive evaluation method; ANSYS; finite element analysis |
| Author | Institution |
| YANG Zhi-qiang |
贵阳职业技术学院 |
| Liu Ying |
贵阳铝镁设计研究院有限公司 |
|
| Hits: 1904 |
| Download times: 2479 |
| Abstract: |
| In order to find an optimized supporting method for a main girder structure of a 500 kA aluminum electrolysis cell, the comprehensive evaluation method and quantitative analysis are used, and it is concluded that the box girder structure is more reasonable for the long-span support main girder. This thesis also analyzes and calculates load on the main beam and checks the dangerous section of the main beam. The ANSYS-Workbench finite element simulation platform is used to simulate the calculation. The results show that the strength, stiffness and stability of the main beam meet the design requirements. |
| Close |