|
| Study on Removal of Heavy Metals from Manganese Sulfate Solution by Sulfide |
| Received:July 04, 2019 Revised:July 10, 2019 |
| View Full Text View/Add Comment Download reader |
| DOI：doi：10.3969/j.issn.1007-7545.2019.12.002 |
| KeyWord:vulcanizing agent; manganese sulfate solution; removal of heavy metal; deep purification |
| Author | Institution |
| TIAN Jia-yu |
贵州大学 材料与冶金学院 |
| WANG Hai-feng |
贵州大学 材料与冶金学院 |
| KUANG Shun-da |
电池用锰材料工程技术研究中心 |
| YANG Qi-kui |
电池用锰材料工程技术研究中心 |
| HU Ping |
电池用锰材料工程技术研究中心 |
| WANG Jia-wei |
贵州大学 材料与冶金学院 |
|
| Hits: 860 |
| Download times: 818 |
| Abstract: |
| Effects of vulcanizing agent, i.e, MnS and BaS, on removal of heavy metals were conducted. Influences of addition amount of vulcanizing agent, reaction temperature, pH value and reaction time on removal of Co, Ni, Cr and Cd were investigated. The results show that MnS and BaS have obvious effect on removal of Co and Ni, but have no significant effect on Cr and Cd. When volume of manganese sulfate solution is 200 mL, the optimum removal condition is MnS dosage of 3 g, BaS dosage of 2 g, reaction temperature of 75 ℃, pH value of 5.5, and reaction time of 3 h. Co drops from 12 mg/L to 0.03 mg/L, Ni drops from 32 mg/L to 0.53 mg/L, Cr drops from 0.50 mg/L to 0.19 mg/L, and Cd drops from 2 mg/L to 0.16 mg/L, respectively. From the perspective of economy and to avoid solution pollution to the largest extent, MnS is suggested in production. |
| Close |
|
|
|