|
| Optimization of Sawdust Magnetization Reduction of Blast Furnace Dust by Response Surface Methodology |
|
Received:March 28, 2022
Revised:April 10, 2022
Accepted:April 13, 2022
Published Online:August 11, 2022
|
| View Full Text View/Add Comment Download reader |
| DOI：doi：10.3969/j.issn.1007-7545.2022.09.017 |
| KeyWord:blast furnace dust; sawdust; response surface methodology; interaction; magnetization roasting |
| Author | Institution |
| ZHANG Qian |
北京科技大学土木与资源工程学院 |
| FENG Ya-li |
北京科技大学土木与资源工程学院 |
| LI Hao-ran |
中国科学院过程工程研究所生化工程国家重点实验室 |
|
| Hits: 1374 |
| Download times: 1771 |
| Abstract: |
| Sawdust is used to provide a reducing atmosphere for roasted blast furnace dust and to recover iron from it, realizing the resource utilization of blast furnace dust while saving energy in a green way. Based on the single-factor test, effects of roasting temperature, roasting time, and reducing agent ratio on iron grade and iron recovery of magnetic separation recovered concentrate were analyzed by response surface method design, and a mathematical prediction model between the independent variables and response values was established. The optimal process conditions for recovering iron from blast furnace dust by magnetization roasting were determined according to the model: roasting temperature of 686.65 ℃, roasting time of 25.03 min, and reducing agent ratio of 1︰8.6. The predicted magnetic iron grade of 68.325% and recovery rate of 90.945% is obtained at this condition, and the difference between experimental verification value and predicted value of the model is within 0.3%, indicating that the model optimization results are reliable. It can be applied to iron extraction process of blast furnace ash by magnetizing roasting of sawdust. |
| Close |
|
|
|