Theoretical Study on Smelting Slag Type of Zinc Leached Slag Combined with Low Grade Zinc Oxide Ore in Oxygen-Rich Side Blowing Bath
Received:April 01, 2022   Revised:April 08, 2022   Accepted:April 13, 2022      Published Online:July 13, 2022
View Full Text  View/Add Comment  Download reader
DOI:doi:10.3969/j.issn.1007-7545.2022.08.001
KeyWord:zinc leaching residue; low grade oxygen sulfur lead zinc ore; bath smelting; Factsage software
                 
AuthorInstitution
LIU Jia-hao 昆明理工大学 冶金与能源工程学院;云南省非常规冶金重点实验室;省部共建复杂有色金属资源清洁利用国家重点实验室
YANG Kun 昆明理工大学 冶金与能源工程学院;云南省非常规冶金重点实验室;省部共建复杂有色金属资源清洁利用国家重点实验室
HU Tu 昆明理工大学 冶金与能源工程学院;云南省非常规冶金重点实验室
LYU Ting-ting 昆明理工大学
HE Lei 昆明理工大学
GAO Li 昆明理工大学
Hits: 2221
Download times: 1912
Abstract:
      The oxygen enriched side blowing bath smelting of zinc leaching residue and low grade oxygen sulfur lead-zinc ore can realize the efficient utilization of low-grade oxygen sulfur lead-zinc ore. At present, there are problems of high energy consumption and low productivity due to high melting temperature and low fluidity of slag. Factage thermodynamic software was used to study the influence of slag composition on slag melting temperature through calculation. The results show that the melting temperature of slag rises gradually with the decrease of mass ratio of slag to ore. Under the same slag ore mass ratio, binary alkalinity has a great influence on the melting temperature of slag, which drops first and then rises with the decrease of alkalinity. When the mass ratio of slag to ore is 3.07 and w(CaO)/w(SiO2)=0.5, the melting temperature of slag reaches the lowest value of 1 327 ℃.
Close