|
| Study on Preparing of Light Refractory and Insulation Material from Secondary Aluminum Dross and Fly Ash |
|
Received:May 29, 2022
Revised:June 02, 2022
Accepted:June 06, 2022
Published Online:August 11, 2022
|
| View Full Text View/Add Comment Download reader |
| DOI：doi：10.3969/j.issn.1007-7545.2022.09.018 |
| KeyWord:secondary aluminum dross; fly ash; lightweight refractory insulation material |
| Author | Institution |
| LIU Zhong-kai |
中铝郑州有色金属研究院有限公司 |
| KANG Ze-shuang |
中铝郑州有色金属研究院有限公司 |
| TIAN Ye |
中铝郑州有色金属研究院有限公司 |
| YAN Kun |
中铝郑州有色金属研究院有限公司 |
| HE Xin-zhong |
中铝郑州有色金属研究院有限公司 |
| FAN Ze-kun |
中铝郑州有色金属研究院有限公司 |
|
| Hits: 1485 |
| Download times: 1736 |
| Abstract: |
| Secondary aluminum dross and fly ash are two major solid wastes discharged from aluminum industry and thermal power industry, and their massive accumulation will cause serious ecological environment pollution. Applying high alumina material pretreated by secondary aluminum dross and fly ash as the main raw materials, and with addition of water reducer, binder and burned loss, the lightweight refractory was prepared by molding, curing and firing. The process conditions for preparing lightweight refractory insulation materials were optimized. It is determined that the ratio of high alumina material and fly ash is 40% and 60% respectively, sintering temperature is 1 250 ℃, and holding time is 20 min, the linear shrinkage of the samples after firing is 1.82%, apparent porosity is 60.57%, bulk density is 0.95 g/cm3, and the normal temperature compressive strength is 4.18 MPa. |
| Close |
|
|
|