|
| Preparation of Iron-Carbon Micro-electrolysis Filler from Cyanide Tailings and Its Degradation Performance for Benzohydroxamic Acid Wastewater |
|
Received:March 01, 2023
Revised:March 01, 2023
Accepted:March 07, 2023
Published Online:June 16, 2023
|
| View Full Text View/Add Comment Download reader |
| DOI：doi：10.3969/j.issn.1007-7545.2023.07.017 |
| KeyWord:cyanide tailings; reduction roasting; micro-electrolytic filler; benzohydroxamic acid; wastewater treatment |
| Author | Institution |
| WANG Dong-fang |
矿冶科技集团有限公司 |
| LIU Ru-chun |
宜春钽铌矿有限公司 |
| HAN Meng-ting |
南京银茂铅锌矿业有限公司;南京银茂铅锌矿业有限公司 |
| YU Wen |
江西理工大学 |
|
| Hits: 1179 |
| Download times: 1574 |
| Abstract: |
| Cyanide tailings are the main hazardous solid wastes produced in the process of gold cyanidation and gold extraction. Iron-carbon micro-electrolytic filler was prepared by reduction roasting from cyanide tailings with high iron grade. The feasibility of treating benzohydroxamic acid wastewater was investigated by exploring the influence of preparation conditions and degradation conditions of fillers on the degradation effect of benzohydroxamic acid wastewater. The results show that the removal rate of phenylhydroxamic acid in wastewater is 80% above under the optimum roasting conditions including roasting temperature of 1 200 ℃, anthracite consumption of 20%, and roasting time of 10 min, and the optimum degradation conditions including dosage of iron-carbon micro-electrolysis filler of 3.75 g/L and pH value of the solution of 4. This method not only realizes the resource utilization of cyanide tailings, but also effectively degrades benzohydroxamic acid wastewater, and achieved the purpose of "treating waste with waste". |
| Close |