|
| Research on Hazardous Characteristics of Smelting Slag from Resource Recycling of Waste Circuit Board |
|
Received:September 08, 2023
Revised:September 18, 2023
Accepted:September 28, 2023
Published Online:November 30, 2023
|
| View Full Text View/Add Comment Download reader |
| DOI：doi：10.3969/j.issn.1007-7545.2024.01.017 |
| KeyWord:hazardous waste identification; electronic waste; resource recycling; oxygen-rich side-blowing smelting |
| Author | Institution |
| XIE Jidao |
中国地质大学武汉生物地质与环境地质国家重点实验室 |
| ZHOU Jun |
湖北跃楚环境技术有限公司 |
| FU Hong |
湖北鑫资环境技术有限公司 |
| ZHANG Caixiang |
中国地质大学武汉生物地质与环境地质国家重点实验室 |
|
| Hits: 1351 |
| Download times: 1561 |
| Abstract: |
| In the process of recycling non-ferrous metals from waste circuit boards, a large amount of smelting slag will be produced. In view of the further safe disposal methods and unclear hazardous characteristics of smelting slag after the implementation of the National Hazardous Waste List (2021 edition), a typical electronic hazardous waste treatment enterprise with oxygen-rich side-blowing melting technology was selected as the research object and 100 samples were collected to test the element types, corrosion and toxicity characteristics. It is concluded that the studied smelting slag is not hazardous waste according to the corresponding standards and can be managed as industrial solid waste. The results are not only helpful for the identification of hazardous characteristics and environmental supervision of smelting slag, but also provide technical guidance for their harmless disposal and resource utilization. |
| Close |